If you like reading this blog, be sure to check out our Film Blog, featuring new content from the world of Plastic Films!
April 22, 2017
Antec 2017 Agenda Posted for Plastic Pipe and Fittings SIG
There are two sessions at the upcoming ANTEC meeting of the Society of Plastics Engineers focusing on Plastic Pipe and Fittings during the conference scheduled for May 8 to 10 at the Hilton Anaheim in sunny Anaheim, California.
The first session will be from 200 PM to 500 PM on Monday, May 8th. This session is jointly hosted by the Failure Analysis and Prevention SIG as well as the Plastic Pipe and Fittings SIG. The joint session schedule along with the presentation titles and authors follows.
2:00 pm - 2:30 pm The evaluation of degradation mechanism of polyolefins, and development of non-destructive evaluating methods - Toshio Igarashi, Kanazawa University
2:30 pm - 3:00 pm CHARACTERIZATION OF SLOW CRACK GROWTH RESISTANCE OF POLYETHYLENE PIPE GRADES WITH CYCLIC CRACKED ROUND BAR (CRB) TEST IN CORRELATION TO STRAIN HARDENING (SH) TEST- Isabelle Berger, Polymer Competence Center Leoben GmbH
3:00 pm - 3:30 pm A novel approach to evaluate lifetime of complex plastic applications Part I: Short fiber reinforced plastics (SFRP)- Joel Thambi, Scientist, SABIC
3:30 pm - 4:00 pm The Cyclic Cracked Round Bar Test as a new standard for accelerated material ranking of polyethylene pipe grades - Andreas Frank, Researcher, Polymer Competence Center Leoben GmbH
4:00 pm - 4:30 pm Statistical Characteristics in Uniaxial Ductile and Semi-Brittle Tensile Fracture in Polypropylene Films- Chun-Yao Li, Kanazawa University
4:30 pm - 5:00 pm NUMERICAL SIMULATION OF DISCONTINUOUS SLOW CRACK GROWTH OF SEMI-ELLIPTICAL SURFACE CRACK IN POLYETHYLENE BASED ON CRACK LAYER THEORY- Jung-Wook Wee, Korea University
The second session will be from 200 PM to 600 PM on Tuesday May 9th. This session is hosted by the Plastic Pipe and Fittings SIG and will conclude with a best-paper award presentation sponsored by Lubrizol's Corzan® Industrial Systems. The award recognizes technology advancements for thermoplastic piping systems.
2:00 pm - 2:30 pm A NEW METHOD TO CHARACTERIZE ENVIRONMENTAL STRESS CRACKING RESISTANCE (ESCR) OF POLYETHYLENE (PE) AND ITS PIPES - Ben Jar, Professor, University of Alberta
2:30 pm - 3:00 pm A New Test Setup for Testing Polyethylene Tubes under Constant and Cyclic Internal Pressures - Siavash Vahidi, Ph.D Student, Drexel University
3:00 pm - 3:30 pm Method for Degrading Polyethylene Sheet Samples in an Oxidative Environment - Susan Mantell, Professor, University of Minnesota
3:30 pm - 4:00 pm DURABILITY EVALUATION TO RESIDUAL CHLORINE ON PLASTIC PIPES - Takehiro Fujii, President, Shinwa Sangyo Co., Ltd
4:00 pm - 4:30 pm ACCELERATED AGING OF POLYETHYLENE PIPE GRADES IN CHLORINE DIOXIDE AND HYPOCHLORITE SOLUTION APPLYING A NEWLY DEVELOPED EXPOSURE DEVICE - Márton Bredács, Polymer Competence Center Leoben GmbH
4:30 pm - 5:00 pm ADVANCED APPLICATIONS FOR HDPE PIPE WITH NEW PE-RT MATERIAL - Wes Long, Technical Projects Director, Performance Pipe
5:00 pm - 5:30 pm INFLUENCE OF LONG-TERM ANNEALING ON RESIDUAL STRESS DISTRIBUTION AND QUASI-BRITTLE FAILURE PROPERTIES OF TALCUM REINFORCED PIPE GRADE POLYPROYPLENE - Florian Arbeiter, Montanuniversitaet Leoben
Click on the following webpage for the full ANTEC schedule: Click here for conference Link. I look forward to seeing you in Anaheim for what is sure to be the best conference on plastic pipe and fittings applications in North America for 2017!
Antec 2017 Agenda Posted for Plastic Pipe and Fittings SIG
There are two sessions at the upcoming ANTEC meeting of the Society of Plastics Engineers focusing on Plastic Pipe and Fittings during the conference scheduled for May 8 to 10 at the Hilton Anaheim in sunny Anaheim, California.
The first session will be from 200 PM to 500 PM on Monday, May 8th. This session is jointly hosted by the Failure Analysis and Prevention SIG as well as the Plastic Pipe and Fittings SIG. The joint session schedule along with the presentation titles and authors follows.
2:00 pm - 2:30 pm The evaluation of degradation mechanism of polyolefins, and development of non-destructive evaluating methods - Toshio Igarashi, Kanazawa University
2:30 pm - 3:00 pm CHARACTERIZATION OF SLOW CRACK GROWTH RESISTANCE OF POLYETHYLENE PIPE GRADES WITH CYCLIC CRACKED ROUND BAR (CRB) TEST IN CORRELATION TO STRAIN HARDENING (SH) TEST- Isabelle Berger, Polymer Competence Center Leoben GmbH
3:00 pm - 3:30 pm A novel approach to evaluate lifetime of complex plastic applications Part I: Short fiber reinforced plastics (SFRP)- Joel Thambi, Scientist, SABIC
3:30 pm - 4:00 pm The Cyclic Cracked Round Bar Test as a new standard for accelerated material ranking of polyethylene pipe grades - Andreas Frank, Researcher, Polymer Competence Center Leoben GmbH
4:00 pm - 4:30 pm Statistical Characteristics in Uniaxial Ductile and Semi-Brittle Tensile Fracture in Polypropylene Films- Chun-Yao Li, Kanazawa University
4:30 pm - 5:00 pm NUMERICAL SIMULATION OF DISCONTINUOUS SLOW CRACK GROWTH OF SEMI-ELLIPTICAL SURFACE CRACK IN POLYETHYLENE BASED ON CRACK LAYER THEORY- Jung-Wook Wee, Korea University
The second session will be from 200 PM to 600 PM on Tuesday May 9th. This session is hosted by the Plastic Pipe and Fittings SIG and will conclude with a best-paper award presentation sponsored by Lubrizol's Corzan® Industrial Systems. The award recognizes technology advancements for thermoplastic piping systems.
2:00 pm - 2:30 pm A NEW METHOD TO CHARACTERIZE ENVIRONMENTAL STRESS CRACKING RESISTANCE (ESCR) OF POLYETHYLENE (PE) AND ITS PIPES - Ben Jar, Professor, University of Alberta
2:30 pm - 3:00 pm A New Test Setup for Testing Polyethylene Tubes under Constant and Cyclic Internal Pressures - Siavash Vahidi, Ph.D Student, Drexel University
3:00 pm - 3:30 pm Method for Degrading Polyethylene Sheet Samples in an Oxidative Environment - Susan Mantell, Professor, University of Minnesota
3:30 pm - 4:00 pm DURABILITY EVALUATION TO RESIDUAL CHLORINE ON PLASTIC PIPES - Takehiro Fujii, President, Shinwa Sangyo Co., Ltd
4:00 pm - 4:30 pm ACCELERATED AGING OF POLYETHYLENE PIPE GRADES IN CHLORINE DIOXIDE AND HYPOCHLORITE SOLUTION APPLYING A NEWLY DEVELOPED EXPOSURE DEVICE - Márton Bredács, Polymer Competence Center Leoben GmbH
4:30 pm - 5:00 pm ADVANCED APPLICATIONS FOR HDPE PIPE WITH NEW PE-RT MATERIAL - Wes Long, Technical Projects Director, Performance Pipe
5:00 pm - 5:30 pm INFLUENCE OF LONG-TERM ANNEALING ON RESIDUAL STRESS DISTRIBUTION AND QUASI-BRITTLE FAILURE PROPERTIES OF TALCUM REINFORCED PIPE GRADE POLYPROYPLENE - Florian Arbeiter, Montanuniversitaet Leoben
Click on the following webpage for the full ANTEC schedule: Click here for conference Link. I look forward to seeing you in Anaheim for what is sure to be the best conference on plastic pipe and fittings applications in North America for 2017!
© Copyright Bryan Hauger Consulting, Inc., 2017. All rights reserved.
© Copyright Bryan Hauger Consulting Inc. 2014-2024 All rights reserved.